Sunday 7 February 2016

More of my Paris project

Yes, it is a long time since my last post but one has to priorities.  Finally finding time to write a new post.  Here are more of my Paris project pieces.
The first three pieces were created using the distortion of an image of some doors on an upper floor of the Arab centre in Paris.



Arab centre doors elongated


I used the hue slider to change the colours.  The first piece is a bag.

Distoted Arab centre doors bag


The design was printed onto fabric, free machine quilted then over painted with metallic paints.  The handle was made using wool yarn which picked out the colours in the panel and then plaited.
Here is a close up of the panel.  You will see that I have added beads for effect.

Distorted Arab centre doors bag close up


I also made a book cover using the same design although the colours are slightly different.

Distorted Arab centre doors booklet


The design was mirrored so it is the same on the back .
I have been creating a number of 20cm x 20cm panels and one of them used this design yet again.

Distrorted Arab centre doors panel


I made the box frame and stretched the finish piece over the frame.
The next four pieces used the distorted windows design which was featured in the last post but again I changed the colour palette.

Distorted La Défence bag


The first is a purse/bag.  The design was printed onto fabric, free machine quilted and made up into a bag.  The handle was wrapped twisted yarns using colours from the printed design.

Distorted La Deefence note book A5


Once again I tweeked the colour palette and created this book front. I dyed the viscose ribbon to tone in with the purples and this fastened the front, back and inside pages together.

Distorted La Deefence pocket book


This is one of my favourite little pocket booklets which again used the same design.

Distorted La Défence note book pinks & purples


And the final piece using this design is a needle case.
As I have said, I have been creating numerous 20 x20cm panels.  I have just shown one above.
Here is another one -

Little fish panel 1


This is one of several panels of little fishes.  I used a photograph I took of some little fish carved on some wood.  I used filters in PS to create different effects.  Those that I liked were printed onto fabric and then free machine quilted.   As they were very intricate , I used a very fine black thread to draw the fish.  The wavy background was created using invisible thread so that only the texture was visible and not distracting coloured thread.

Sweet pea panel 1


This is another 20x20cm panel.  It used a photograph of some sweet peas.  The image was printed onto silk then free machine quilted. It was a difficult design and I am not totally happy with it although it looks better in reality than it does in this image. I used my Inktense pencils to enhance the colours a bit and metallic threads to give it some sparkle - still not totally happy.
Well that's it for this post.  Back to an ambitious piece which is going to take ages to complete.

Saturday 12 December 2015

Paris project comtinues

Not such a long gap this time so straight on with the post.

The first piece was inspired by a carved motif on a door not far from our hotel.

Streets-&-Seine_2874

 This is the motif itself.

Streets-&-Seine_2874-door-motif

I made a pattern of the motif.
Door-motif
I used a lovely red satin weave fabric for the base to work the gold motif. The lid was for the main design. I padded the main motif shape and hand satin stitched the fan design. Another version of the design was created on the sides.  They were machine stitched and painted with gold metallic paint.

Door-motif-goldwork-box

As always, I created a mobile using the text of Paris.  Each letter was stitched out by the machine and a digitised distorted Paris text stitched out for the header of the mobile.

Paris-text-letters-mobile

Obviously, the tower itself would be the base of many designs including this one of a needle case. I wanted to use up some serendipity paper so I ironed vilene onto the back to give it body and strength. I made different sized stencils of the tower and stenciled them onto the paper. The largest and front tower was over-stitched with gold thread to represent the structure of the tower. I used one of my Eiffel tower charms to hang from the tie.

Eiffel-tower-needle-case

I distorted the text of Paris then digitised it to stitch out on the front of a needle case.  Dyed blue fibres were laid down on the front of the folder and held in place using vermicelli stitch and gold thread. The digitised name was machines and then outlined using gold Japanese thread.

Distorted-Paris-text-needle-case

The pyramids at the Louvre were a needed inclusion to the project.  I wanted to represent the glass panels of the pyramid.  I decided to use Irisé cellophane paper.  This was laid over painted pelmet vilene with machine pattern stitches for the framework.

Louvre-pyramid-box-2
Louvre-pyramid-box-1





It turned out better than I had hoped.

One of the entrances to a metro station used a contemporary design of circles and coloured glass.

Streets-&-Seine_2884

I decided to create some jewellery using the circles as the design source.  I rarely throw anything away and the little metal or plastic rings from old bras were just the job. I covered them with buttonhole stitch using a silver fingering thread. When all were complete, I stitched them together into a pendant necklace and a bracelet.

Underground-entrance-art-jewellery

Continuing with the tube station entrance design, I decided to make a design to stitch onto the front of a note book.

Underground-entrance-art-note-pad-booklet


Different sized rings were covered with silver fingering and then joined together into a design for the front of a note book book.

Distorted-La-Défence-windows-needle-case


A further use of the distorted windows was to make the cover for a needle case.  the design was printed onto fabric, slightly padded and then machine quilted following the edges of the design.

Distorted-La-Défence-windows-make-up-purse

A different distorted effect was printed onto fabric and once again machine quilted and made up into a make-up purse.  I used gold buttons filled with tiny beads to cover the stitches of the press fasteners.

That is it for this post.  More to come.
Cheers everyone.

Thursday 12 November 2015

More of the Paris project

Another long gap between posts but at last the time to post.
There are a number of what are known as 'ponds' around the pyramids outside the Louvre in Paris.  They have now become cracked and damaged and are now,  I understand, undergoing renovations. I took photographs of the tiled floor and through the water they were a lovely range of pastel blues, greens and yellows.
Louvre,-day_2903

I took two slightly different photographs of these tiles and they inspired me to create two large painted and stitched panels.
P-Louvre-pond-panel-1

P-Louvre-pond-panel-2

One of my favourite buildings in Paris is the Grand Arch at La Défence.  It has many windows with lots of reflections in them.
DSC_9401

I wanted to interpret this in some way and came up with the idea of having different iconic places in Paris in each of the windows. The windows were replicated in the sides and lid of a box.
Bx-Paris-locations-acetate-image-box


The images in the windows were printed on clear acetate.  The cross members of the windows were made from button hole bars.
After creating the oak leaf vessel and bag tag, I continued with the oak leaf theme and made an oak leaf tassel. I made three oak leaves from pelmet vilene for the header of the tassel.
Ts-Oak-leaf-tassel

While I was on with making tassels, I decided to make an Eiffel Tower tassel using the same method.
Ts-Eiffel-tower-tassel
The tower is decked out with lights for  nightly light show so I used beads down the joins to represent this.
Following the theme of iconic places in Paris, I printed more of them on the acetate sheets and used them on the flap of a hand bag.
Iconic-places-in-paris-bag

The body of the bag was dark green acrylic velvet.  Not easy to work with and so very messy.  Bits everywhere!! However, it looks nice.
I have already used the Arab Institute building as inspiration for a number of pieces and this wall of tiles was used again to create another piece.
DSC_9110
I used a distortion filter on this image of the tiles.
DSC_9110-curly-Q
To create the fabric I used a mono printing method.  I spread a mixture of gold paints over a sheet of teflon and using my finger created the scrolls.  I pressed the fabric onto this paint to print it onto the fabric.  I added the black swirls with a brush.  The resulting fabric was made up into a purse and I used a swirly design to quilt the fabric.
Monoprint-bag

Finally, from another iconic structure, the Moretti tower in La Defence, I created a panel.
DSC_9502
The tower is very colourful with painted tubes of colour. Again, I applied a distortion filter to create a pattern.
DSC_9502-Displ-1
I couched coloured yarns as close as possible to the colour of the tower and the design.
Moretti-tower-panel
Well, that's it for this post.  Hopefully it won't be so long to the next one.
Cheers to everyone who visits.

Thursday 23 July 2015

Successful exhibition and workshop then back to Paris

My exhibition at the Scottish textile museum in Hawick, Scotland seems to be very successful with lots of positive feedback. I was very pleased with the way the pieces had been displayed. A lovely job.

The workshop too was very successful with everyone enjoying trying new things and some right out of their comfort zone.

The will be another workshop at the end of August.  I hope it will be as successful as this last one.

Back to my Paris project now.

On either side of the gates to the Tuileries garden which leads to the Louvre, are two towers which are decorated with oak leaves and acorns.

Place-de-la-Concorde_2808

I used the design of the oak leave for a couple of pieces.


Place-de-la-Concorde_2808-acorn-and-leaf-motif

First I had to make a pattern.

Oak-leaf-vessel

As the original was a tower I decided to make a round  vessel. I used pelmet Vilene as the base material, painted it, added a mesh then using the traced pattern machined the acorns.  Once the machining was complete, I painted the leaves and acorns. The top edge was cut and the Vilene rolled and a base stitched to it.

V-Oak-leaf-vessel


V-Oak-leaf-vessel-close-up

I also made a bag tag of a single oak leaf.

T-Oak-leaf-bag-tag

The aperture metal windows of the Arab centre inspired a bracelet made from faux silver leather.

J-Arab-centre-silver-cuff

There are a lot of tiny silver beds on the centre of the star.

The internal tiled wall inspires another bracelet.
DSC_9110

J-Arab-centre-tiled-wall-cuff

The architecture of La Défence inspired many pieces.  This wall of windows was first changed with a colour filter and then distorted.

La-Defence,-central-area_3693


La-Defence,-central-area_3693b-bracelet-small


Q-Distorted-windows-art-quilt

This is the resulting art quilt.  I created a pattern and then traced it onto white calico.  I really enjoyed painting this piece before it was free machined.

Still in La Défence, the wonderful structure of the Grand Arch inspired this art quilt.

DSC_9397


Q-Grand-Arch-steps-panel


And that is it for now.
Cheers